Paste for bonding the cardan joint sleeve Staburags NBU 30 PTM, 50g

07559056992
€30.24 excl. VAT

VAT deduction has been applied. You have entered a foreign address as a VAT payer. The purchase will be with 0% VAT. Prices on the e-shop are displayed excluding VAT.

Delivery to the EU usually takes 2–5 days.
Quantity
Add to wishlist
In Stock

Staburags NBU 30 PTM, tube 50g.

White sticky paste used for proper fixation of rubber joint sleeves. It prevents water and dirt from penetrating through the sleeve. Apply the paste to the sleeve during every service of the final drive, ideally every 10,000 km.

  • The packaging is sufficient for approximately 10 applications.
  Secure payment gateway.

Apple Pay, Google Pay, credit card payment.

  Shipping to the EU for €5.99 or free on orders over €99.

Fast shipping via DHL (and partners). If in stock, 2–7 days across the EU.

  Need advice? Call us (English, Czech) or write to us (in your language).

+420 604 111 341 info@mojegs.cz

Don't forget to grease the shaft's gearing with Castrol Optimol during the final drive service.

Video of the complete final drive service:

Time stamps in the video for individual tasks:

1:15 - 2:20 removing the fender, loosening the fill screw, loosening the drain screw - you will mainly need Torx of various sizes, everything can be found in the Honiton set.

3:30 - 6:40 wheel removal, brake caliper removal, lowering the final drive, disconnecting the shaft

6:54 - Castrol Optimol - greasing the splined shaft

8:06 - Staburags - attaching the boot

8:50 connecting the shaft

10:40 returning the boot to the correct place (if damaged, cracked, replace with a new one (rear boot R1250GS/A, R1200GS/A LC 2013-2018, rear boot R1200GS/A 2004-2012, rear boot R1150GS/A, R1100GS))

11:00 - 13:20 reassembling all components back, including specifying the torque values - you will need a torque wrench.

13:35 filling with 180ml of appropriate oil (we recommend Castrol 75W-140, alternatively Motorex Penta LC 75W-140 or the original BMW Hypoid Axle Oil G3). For precise filling, use a syringe.

07559056992

Data sheet

Manufacturer:
BMW
Type of consumable material:
Cardan and everything around it

Specific References

EAN13
07559056992

You might also like

16 other products in the same category:

Customers who bought this product also bought: