-
Motorcycle
-
-
-
-
G-series and others
-
-
-
On the road
-
-
-
Tools and travel accessories
-
-
-
Don't miss out
-
-
-
...
-
-
-
-
-
-
-
Little treats
-
-
-
..
-
-
-
Apparel
-
Denali D7 PRO Multi-Beam X-Lens auxiliary LED lights
2x DNL.D7P.050
Secure payment gateway.
Apple Pay, Google Pay, credit card payment.
Shipping to the EU for €5.99 or free on orders over €99.
Fast shipping via DHL (and partners). If in stock, 2–7 days across the EU.
Need advice? Call us (English, Czech) or write to us (in your language).
+420 604 111 341 info@mojegs.cz
Denali is an American brand, the absolute top among auxiliary motorcycle lights. Uncompromising performance, materials, and craftsmanship.
Wiring of the lights:
- You can wire the lights in the traditional "dumb" way, connecting two wires to the motorcycle battery contacts and the third wire to the so-called switched positive. You can find the switched positive depending on the type of motorcycle, for example, from the main light, tail light, switch, etc. The disadvantage is sometimes more complicated connection, interference with the original wires, and also not utilizing the full potential of the lights. For such a connection, you need the wiring Denali Standard Wiring or Denali Premium Wiring.
- You can connect the lights through the Denali Cansmart electronic device manager. This allows for a plug-and-play connection without interference with the original wiring, offering a wide range of settings for how the lights should behave (e.g., brightness intensity, quick flashing simultaneously when honking, turning off one light while indicating, connecting additional components, etc. See the function descriptions on the electronic device manager's page.
- When you do not want or cannot use Cansmart, the best connection is through the Denali DialDim Light Controller.
For mounting on the crash bars, you will need clamps or even better Denali metal clamps.
If you do not have and do not want an upper crash bar, the lights can be mounted on specific brackets according to the type of motorcycle:
R1200GS Adventure LC 2014-2018
G310GS 2018+ you will need clamps.
To utilize the maximum potential of the lights, connect through the Cansmart electronic device manager according to the type of motorcycle:
R1200GS Adventure LC 2014-2018
You can connect the lights in dual-channel mode, i.e., for instance, the middle strip of LEDs will serve as daytime running lights, and with the motorcycle's high beam, all lights will turn on. For this connection, just the light set and the Cansmart are needed.
Another option is to connect the lights in three-channel mode. The lights can then light up as described above, and additionally, the middle strip of LEDs will serve as a turn signal. For this setup, you additionally need 2 pieces of 160cm extension cables.
For motorcycles where you do not want or cannot use the Cansmart unit, you can use the universal Denali DialDim light controller.
2x DNL.D7P.050
Data sheet
- Manufacturer:
- Denali
- Type of light:
- Auxiliary lights
Lighting sets
Specific References
- EAN13
- 5678764578879
You might also like
- New
- New
€132.13
16 other products in the same category:
€628.09
Wunderlich Toolbox for BMW R1250GS 2018-2023, R1200GS LC 2013-2018 without carriers and cases, black
Ordered on request
€217.07
- New
€529.58
€285.01
- New
€767.34
Denali D7 PRO Multi-Beam X-Lens auxiliary LED lights. The upgraded D7 comes with 3 types of attachable X-Lens in the package, allowing the lights to function as high beams, hybrid, or fog lights with the option to change the color to yellow or orange using the X-Lens. In combination with the electronic device manager (see below) and extension cables, you can achieve, for example, that the light shines in the central strip during regular daytime running, blinks when flashing, and activates all 14 diodes for maximum power when honking or turning on the high beam.
Each light contains 7x 14W LEDs and reaches a total of over 23000 lumens and a range of 380m. We recommend using them at full power as high beams, and for daytime running use, you can dim them by connecting through the electronic device manager (see list below).
The package includes:
- 2x LED auxiliary lights
- 2x 3pcs X-lens (clear, yellow, orange)
- light mounts (without brackets for the drop frame)
Main parameters:
- range 380m, beam width 75m
- 2x 11900 lumens
- Cree XML3 LED diodes 14x14W
- light dimensions - diameter 11.2cm x 9.9cm depth
- IP68+IP69